Hummingbird Feeder Parts – the best hummingbird feeder parts of 2018. Top reviews, brands, selection tips, and more.
Top 7 Hummingbird Feeder Parts
Part of taking proper care of your hummingbird feeder is to see the birds are not pestered by ants, bees or other insects. This simply but elegantly constructed ant moat is popular among hummingbird lovers for a number of reasons. Firstly, it is highly effective in keeping the ants and other little creepy crawlies away from your feeder. All you need to do is fill the moat with water and the birds will be safe. Also, installing the guard is a cinch and it can be attached with pretty much most commonly designed hummingbird feeders. In addition, the fact that the product is conveniently priced is, we reason, another big reason for its popularity.
Flying insects such as bees and wasps are other common nuisances for hummingbird feeders. These tips that can be slid easily on the underside of the feeding flower ports make for a great contraption to keep the bees away from your feeder. The tips are really a flexible membrane that bees can’t break through but a hummingbird’s sharp beak will easily make its way through them. The tips are compatible with a wide range of Aspects Feeder models but will also fit many other feeder models as well. If you are building your own hummingbird feeder, you can determine the measurements of your feeding flower portals in accordance with the size of these tips. Comes in a pack of 12.
These feeder tubes are among the most frequently bought hummingbird feeder parts and it is easy to see why. The tubes come handy as a replacement part if one or more feeder port tubes from your current hummingbird feeder model are broken and or are not functioning properly. Or you can also use them if you are crafting your own hummingbird feeder. The tubes are made of glass which makes them more weather-resistant than plastic tubes. The tapered black rubber stoppers will fit most wine and other common types of bottles and the red flower-shaped caps are well-designed and will attract the birds easily. The product comes in packs of 3, 6 and 9.
A good brush set is a necessary maintenance tool for your hummingbird feeder. Feeders, the container especially but the other parts as well, need to be cleaned regularly and thoroughly to prevent buildup of mold, bacteria, etc. as also to deter other insects. The brushes from this 6-piece set from Outus contain soft and durable nylon bristles that help you thoroughly clean the container, the base and the feeding ports of your feeder. The small bristles make it easier for you to reach the all the nooks and crevices of your different feeder parts.
This is the costliest product on this list. When it comes to hummingbird feeder hooks, you can find many less pricey options. However, this product is still highly popular specifically among buyers (often, landscape designers) who look to make their hummingbird feeder gel with the rest of the attractive décor of their outdoor space. This elegantly designed product is made of a solid square steel rod (painted black) with two hooks one of which comes with a hummingbird silhouette. You can use the hook cranes to hang hummingbird feeders but also other items such as bug lights lanterns, wind chimes, plants, etc.
Best-1 is one of the most popular brands in hummingbird feeders. And this replacement bottom fits all Best-1 feeder models. In addition, one can use it to build his own hummingbird feeder. The product will save the DIYer the time and effort to create a base as long as he can find a container or bottle that will fit the dimensions of the bottom mouth.
Another brand-specific (this time, Perky-Pet) product that you can use if you are building your own hummingbird feeder. The yellow bee guards are effective in keeping bees away from the feeder and they will fit into the feeding ports of most Perky-Pet as well as regular hummingbird feeder models. Conveniently priced at $8, per pack of the product contains four replacement bee guards.
Hummingbird Feeder Part Information
If you have hummingbirds as your neighbors, it is a nice idea to hang a hummingbird feeder at a convenient place around your porch, balcony or garden. A feeder makes those little cute hummers visit your house more often and for all bird lovers, that is a pleasure to savor.
However, when you are using a feeder, it is important that you have adequate knowledge of hummingbird feeder parts and accessories. This will help you keep your hummingbird feeder in good shape all the time and ensure that birds do throng by your feeder to sip the nectar.
It is all the more necessary to know how to take proper care of your feeder parts since the feeders are normally kept outdoors and therefore, over time, the different feeder parts can get compromised due to constant exposure to natural elements.
Types of Feeder Parts
When it comes to hummingbird feeder parts, we can break it down to two basic types: (1) the basic working parts or components common to all feeders and (2) hummingbird feeder accessories and maintenance kit.
No matter whether you are getting a store-bough feeder or building one by yourself, you would want the feeder to be as comfortable for the birds as possible. And a good understanding of the parts and the accessories would help you achieve just that.
Basic Working Parts of a Hummingbird Feeder
Nectar Container: The container or the nectar reservoir is where you fill the nectar in. There are scores of different hummingbird feeder models and accordingly, the container also comes in a variety of different shapes, sizes and colors. Commonly, the containers are either made of glass or plastic.
You may choose one that suits you best but there are a few things you need to keep in mind when choosing any particular model. Firstly, the container of the feeder must be easy to clean since regular cleaning of the container is necessary to prevent build up of bacteria or an infestation of mold, ants or other pesky insects.
Additionally, you may consider getting a container with attractive cover design since this helps deter thirsty bees from gathering around the feeder. It is also a good idea to choose a model with a container that opens from above. This way you don’t need to detach the base from the container when filling the latter with fresh nectar.
Feeding Flower Portals: The flower port or portal is the part the birds will eat out of. Normally, all feeder models will contain at least three or four flower ports but if you have a large volume of hummingbirds around your neighborhood, you may consider a model with a higher number of ports.
The basic thing about the flower portal is, as its name suggests too, is that it should resemble a flower. Additionally, it should also come in bright colors (most commonly, bright red or yellow) since these colors attract the tiny chirpers the most. In fact, bright red is the most crucial color when it comes to hummingbird feeders and all feeder models must contain a generous splash of red either in the portals themselves or upon the base or the container.
The Bottom or the Base: The bottom holds the feeding ports and a mouth which attaches with the reservoir/container that will hold the nectar.
The Hook or the Hanger: You will require a hook, hanger, crane or any other such device to hang your hummingbird feeder (if you are not hanging it directly on a tree branch). As for this feeder part, you will find a variety of products and you can take your pick according to your taste, budget and other requirements.
The Perch: Many hummingbird feeder models come with a broad base where the birds can perch and rest. Some models also contain a detachable separate contraption used as a perch. However, this is not an essential feature of a feeder. The birds normally eat out of the feeder and then flutter away among the trees. Still, if you want, you may choose a model that provides the birds with a resting place.
Feeder Part Costs
Hummingbird feeder models are available at a wide price spectrum. Starting right from one-dollar plastic feeders to high end feeders on the other end of the spectrum (some of which may cost as much as $100 or more). So, it only makes sense that when it comes to cheaper models, you normally don’t get (and won’t look for either) spare parts since it is much more convenient to simply replace the old model with a newly bought one.
However, you do get feeder spare parts from some brands that manufacture relatively costlier models. For example, spare bottles and spare bases are available for different Best-1 hummingbird feeder models. These are available at Amazon and other online stores and the costs depend on the model of the spare part concerned but as far as B-1 feeder spare parts are concerned, all individual parts are available under $10.
Some other feeder parts (which can be used with most models) such as replacement parch, copper hooks, stoppers and spouts, suction tubes, etc. are also available and they will normally set you back anywhere between $5 and $ 20, depending on the product and the quality you settle for.
How to Repair a Hummingbird Feeder
There is not a lot of repairing involved with a hummingbird feeder. The most common problem that feeders experience is the leakage problem. Since the containers are kept in an inverted position all the time, it is somewhat natural that leaking issues will arise in time. Most commonly, the leaking issues occur around the hole of the tube when the stopper is torn, worn out, split or has deteriorated.
This issue can be easily solved by purchasing replacements for damaged spouts. If the leakage occurs due to some little chip or crack at the rim or the neck of the container, there is not much you can do by way of repairing, especially if it is a glass container. The easiest solution in such cases is to replace the bottle with a new one.
However, there are some preventive measures that you can take beforehand to minimize the risk of leakage issues. These are:
• Filling the bottle to full capacity every time you pour nectar (so that there is no room for air to enter the bottle).
• Hanging the feeder in a place where it will receive sufficient shade throughout the day (too much heat or wind changes the air pressure in the bottle and this can lead to chips and cracks).
• Cleaning all the feeder parts separately at least twice a week.
How to Build your Own Hummingbird Feeder Step by Step
You can build your own attractive hummingbird feeder using a variety of different household materials and in different methods. The below is our favourite one.
Get one discarded glass bottle with cap and a couple of cans. (We suggest using a red or green-tinted glass bottle since the colors will make it more attractive to the birds.) Use a scissor to make a whole in the cap with a diameter of about 1 cm or 3/8 inch.
Cut out the bases of the cans and make a similar sized hole in one of these bases. Fit the bases together face-to-face and attach then using epoxy glue. Use a 1/8 inch drill bit to drill three equally spaced holes around the rim of the upper base. You will fit the feeding flower portals onto the holes later. Again, use some glue to attach the holed cap upon the hole of the base. Give some time to dry the epoxy and you now have your feeder bottom ready.
Draw three similar flower shapes onto the body of the cut out cans and cut the shapes out. Again, use the same drill bit to drill a single hole on the middle of each of the flower shapes. Spray paint both the shapes and the base. You can use yellow for the flowers and red for the base or vice versa.
Use some more epoxy to attach the flower shapes onto the base. Use toothpicks to make sure that the hole of the shapes fit right onto the holes drilled on the sides of the base.
Once everything is dry, screw the bottle onto the mouth of the base and attach a hanger onto the bottle using hot glue, twine or wire… and you have your own homemade hummingbird feeder all ready to use!